Google Analytics 4 Setup: A Step-by-Step Guide for Irish Businesses

To set up Google Analytics 4 (GA4), create an Analytics account and property, add a web data stream for your website, and install the Google tag on every page. Then confirm in the Realtime report that your own visit shows up. For a business in Ireland there is one more job: your cookie banner must collect consent before analytics cookies are set. This guide takes you through each step in plain language, in the order you should do them.
TL;DR
- Create the account and property at analytics.google.com, choose Ireland’s time zone and euro as the currency, then add a web data stream for your site.
- Install the Google tag once, through your website builder, a plugin, pasted code or Google Tag Manager. Never two methods at once.
- Check your own visit in the Realtime report within minutes. Standard reports can take 24 to 48 hours to fill.
- Irish rules require consent before analytics cookies are set, so set up your banner at the same time as the tag.
- Start with three reports: where visitors come from, which pages they view and which actions count as enquiries.
Table of Contents
- What you need before you start
- Step 1: Create your account and property
- Step 2: Add a web data stream
- Step 3: Install the Google tag
- Step 4: Check that data is arriving
- Step 5: Handle cookie consent in Ireland
- Step 6: Choose what to look at first
- Common setup mistakes to avoid
- Our perspective
- Where a well-built website fits in
- FAQ
- Sources
What you need before you start
Gather four things before opening Analytics. It saves backtracking halfway through.
- A Google account you will keep for the long term. Use one tied to the business, not a personal account of a freelancer who may move on. You want to own the property.
- Admin access to your website, or to whoever manages it. You need to add a snippet of code or a plugin setting.
- Your site’s address, written exactly as visitors see it, for example
https://www.yourbusiness.ie. - A decision on what counts as success. For most Irish sole traders and tradespeople, that is an enquiry: a form submission, a phone tap or a WhatsApp click. Know which one before you build anything.
That last point matters more than it sounds. Analytics will count thousands of small things. Only a few of them pay your bills.
Step 1: Create your account and property
Google’s own setup guide follows the same sequence: an Analytics account, then a property, then a data stream, then the tag on your site. Here is what each piece means.
- Account: the top-level container, usually named after your business.
- Property: one set of reporting for one website. A single business website needs one property.
- Data stream: the connection between your website and the property.
Go to analytics.google.com, sign in and open Admin. Create the account, then choose Create and then Property. Enter a property name, such as “Murphy Plumbing website”, and select the reporting time zone and currency, as Google’s instructions describe.
Time zone and currency
Choose Ireland’s time zone and euro. Reports are cut at midnight in the time zone you pick, so a wrong zone shifts enquiries into the wrong day. Currency matters only if you track sales values, but it is easier to set correctly now than to explain later.
Business details
Google will ask for your industry and business size. Pick the closest match. These answers do not change how your tracking works, so do not spend long on them.
Change data retention straight away
One default catches many new owners. According to TaggingDocs’ property setup guide, event-level data retention starts at 2 months, and the advice is to change it to 14 months in Admin under Data Settings. The same source warns that data lost under the shorter setting cannot be recovered afterwards. If you want to compare this spring with last spring, do it on day one.
Step 2: Add a web data stream
When prompted, choose Web as the platform. Enter your website address and give the stream a name. Leave enhanced measurement switched on: it collects scrolls, outbound clicks and similar interactions without extra work.
When the stream is created, Google shows you a Measurement ID beginning with “G-”. Keep that page open or copy the ID. It is the one piece of information your website needs.
Step 3: Install the Google tag
There are four common routes. Choose the one that matches how your site is built, and use only one.
| Your situation | Best route | Effort |
|---|---|---|
| Site on a website builder with an Analytics field in its settings | Paste the Measurement ID into that field | Minutes |
| WordPress or another CMS | Use the theme’s tracking field or a reputable analytics plugin, entering the Measurement ID | Under half an hour |
| Hand-coded or custom site | Paste the Google tag into the head of every page, or into the shared header template | Needs a developer or confident editor |
| You plan to track forms, calls and WhatsApp clicks | Install through Google Tag Manager | Longer, but more flexible |
Using a website builder or CMS
This is the easiest route. Most builders ask only for the Measurement ID. Paste it, save and publish. Do not also paste the full code snippet elsewhere.
Pasting the tag manually
In the data stream details, Google gives you the Google tag to install. It must be on every page you want measured, not only the homepage. If your site uses a shared header file, add it there once and it covers everything.
Using Google Tag Manager
Google Tag Manager is a container you add to your site once. After that, you manage tags from its dashboard. Google’s Tag Manager guide says to add a Google tag with your Tag ID, set an Initialization trigger, preview it with Tag Assistant and publish. Preview before you publish: it shows whether the tag fires on the pages you expect.
Tag Manager suits owners who will later want to track button clicks, phone taps or form submissions, because those changes need no new code on the site. A Measurebase guide also recommends it, with a warning that two installation methods at once will double every page view.

Pick one method and stay with it
This is the single most common error. Google Analytics Help lists the usual reasons for missing data: the tag is absent, installed incorrectly, the site has had no traffic, or the data has not yet been processed. The same troubleshooting page says to use either the Google tag or Tag Manager, not both, because both together can overcount.
It often happens quietly. A plugin adds the tag, and later someone adds it again through Tag Manager. If you want to understand the logic of tag firing in more depth, how server-side tracking works is a good next read on why one clean collection path matters.
Step 4: Check that data is arriving
Do not assume the install worked. Verify it in under ten minutes.
- Open your website in one browser tab, ideally on your phone using mobile data, and click through a few pages.
- In Analytics, open Reports and then Realtime.
- Look for yourself. Google’s developer troubleshooting guide says to check Realtime first, and that correctly fired data should appear within minutes. Realtime covers roughly the last 30 minutes, according to Ignite Digital’s GA4 guide.
If you see one active user, the tag is working. Do not worry if the standard reports are empty. The same Google guide notes that most of them need 24 to 48 hours to process.
Events GA4 collects automatically
On websites, GA4 records page_view, session_start, first_visit and user_engagement without any setup, per the Google guide above. That is enough to answer basic questions such as how many people visit and which pages they view.
Using DebugView for event-level checks
When you add custom tracking, such as a form submission, use DebugView. Google recommends enabling debug mode, interacting with the site and watching the events and parameters arrive in real time. With gtag.js, debug mode is switched on by passing debug_mode: true. If you use Tag Manager, its preview mode does the same job.
Spotting duplicate tracking
If traffic looks suspiciously high, with every page counted twice, you probably have two tags. A GA4 Experts walkthrough calls a hardcoded tag plus a Tag Manager tag the most common cause of doubled page views.
To check it yourself, open your site, right-click and choose View Page Source, then search for your Measurement ID. Next, open the browser’s Network tab and filter for “collect”. Trackingplan’s guide says several /g/collect requests on a single page load point to a duplicate setup, while a 204 response is the expected healthy reply. Remove the extra tag, not the correct one.
Step 5: Handle cookie consent in Ireland
This step separates a sound Irish setup from a copied-and-pasted one. The Data Protection Commission’s guidance note on cookies says analytics cookies are not strictly necessary, so they may be set only after the visitor gives clear, affirmative consent. It also says a banner needs a reject option as prominent as the accept option, and that stored consent should be reaffirmed within six months.
In practice, that means:
- No pre-ticked boxes and no “by continuing you agree” wording.
- Accept and Reject shown equally, same size and same visual weight.
- The tag waits for consent. If your banner tool and your analytics tag are not connected, the tag may fire regardless, which defeats the purpose.
- A cookie or privacy page that names Google Analytics and explains what it is for.
Consent Mode
Google’s Consent Mode passes the visitor’s choice to Google’s tags. A Cardinal Path summary reports that from March 2024, organisations wanting to keep measurement and advertising features for users in the European Economic Area must collect consent and share the consent signals with Google. In its basic mode, if consent is denied, Google receives no data. Expect your reports to show fewer visitors than actually came, because some people will decline.
Most small business sites do not need to go further than a compliant banner connected to the tag. If you also run advertising, ask whoever manages it to confirm the Consent Mode settings.
We cover the wider data protection picture for small sites in our guide to GDPR details for a small business privacy policy. For a shorter read on tracking and Irish SMEs, see our GA4 basics and GDPR notes.

Step 6: Choose what to look at first
GA4 has a lot of reports. A new business owner needs three. A home service owner’s guide from Kaera Marketing points to the same trio.
| Report | The question it answers | What to do with it |
|---|---|---|
| Traffic acquisition | Where do visitors come from: search, social, direct, Google Business Profile? | Put more effort into the sources that bring visitors who contact you |
| Pages and screens | Which pages do people view and engage with? | Improve the pages people reach most, and make sure each has a clear next step |
| Key events (conversions) | How many visitors completed an enquiry? | Judge your site on this number, not on raw visits |
Mark your enquiries as key events
Visits are vanity. Enquiries are revenue. Decide which actions count: a contact form submission, a click on your phone number, a WhatsApp button tap or a thank-you page view. Set these up as key events so GA4 reports them separately. If you use Tag Manager, each one is a small tag with a trigger, and DebugView will confirm it fires.
Give it time
A site with 40 visits a week produces thin data. Look at trends over a month or more rather than reacting to one quiet Tuesday. If your visits are healthy but enquiries are low, the problem is usually the site and not the analytics. Our checklist on why a website is not getting enquiries covers the common causes.
Common setup mistakes to avoid
- Two tags on one site. Covered above, and the most frequent fault.
- Tag only on the homepage. Check a deep page in Realtime, such as a service page.
- Leaving retention at 2 months. Change it on day one.
- Counting your own visits. If you or your staff browse the site daily, internal traffic can distort small numbers. GA4 lets you define and filter internal traffic in Admin.
- A banner that looks compliant but does not control the tag. Test that declining actually stops analytics cookies.
- Using an account you do not own. Make sure the business owner holds Administrator access, whoever did the setup.
Our perspective
We build websites for new businesses, sole traders and small businesses across Ireland, and we see the same pattern. The owner has a site and no idea whether it is working. Analytics is meant to answer that question, but it is usually set up once, never checked and rarely connected to the thing that matters: enquiries.
Our view is that tracking should be as simple as the site itself. One tag, installed one way, with a handful of enquiry actions measured. That is far more useful than a dashboard with fifty numbers nobody reads. A site designed with clear enquiry forms, WhatsApp buttons and focused service pages gives you something worth measuring from day one.
We also think privacy belongs in the build, not as an afterthought. A banner that matches Irish guidance, a plain privacy page and a tag that respects the visitor’s choice protect the trust you are trying to earn. Getting that right at launch is much easier than patching it later.
Finally, a website is not a one-off job. Tags break when plugins change, and forms stop working after updates. That is why we pair our websites with ongoing care, so the thing you are measuring keeps working.
niall
Where a well-built website fits in
Analytics only tells you what a site is doing. It works best on a site built to turn visitors into enquiries in the first place. We design fast, mobile-friendly websites for Irish businesses, with enquiry forms, WhatsApp integration and service pages. Our Launch Website is €499 one-off, the Business Website is €799 one-off and the Growth Website starts from €1,295 one-off. Website Care is €29 per month, and the Business Growth Care plan is €49 per month.

See every package and plan on our website pricing page, or read about lead generation websites for Irish businesses if enquiries are your main goal.
FAQ
Is Google Analytics 4 free?
Yes, the standard version of Google Analytics 4 is free to set up and use for a normal small business website. Google’s own setup guide presents it as a no-cost way to get insights on a website or app. You pay nothing to create the account, property or data stream.
How long until GA4 shows data?
Your own visit should appear in the Realtime report within minutes if the tag is working. Standard reports usually need 24 to 48 hours to process, according to Google’s troubleshooting guidance. If Realtime stays empty, check that the tag is on the page and that you have used only one installation method.
Do I need a cookie banner for Google Analytics in Ireland?
Yes. The Data Protection Commission’s cookie guidance treats analytics cookies as not strictly necessary, so they need clear, affirmative consent before they are set. Your banner should offer reject as prominently as accept. Make sure the banner actually controls when the tag runs.
Should I use Google Tag Manager or paste the tag directly?
If you only want basic visit data and your builder has an Analytics field, pasting the Measurement ID is quick. If you plan to track form submissions, calls or WhatsApp clicks, Google Tag Manager gives you more control without editing the site each time. Whichever you pick, use it alone.
Why do my page views look doubled?
The usual cause is two copies of the tag, such as one in a plugin and one in Tag Manager. Google Analytics Help warns that installing both can overcount data. Search your page source for the Measurement ID, remove the duplicate and recheck in Realtime.
Sources
- Set up Analytics for a website and/or app, Google Analytics Help
- Set up Google Analytics in Tag Manager, Tag Manager Help
- Troubleshoot tag setup on your website, Google Analytics Help
- Verify and troubleshoot your Google Analytics setup, Google for Developers
- Guidance Note: Cookies and other tracking technologies, Data Protection Commission
- Property Setup, TaggingDocs
- Setting up Google Analytics 4: the complete guide, Measurebase
- Check if Google Analytics Is Installed and Working, GA4 Experts
- How to Check Google Analytics: A Marketer’s Guide, Trackingplan
- Transition from Universal Analytics to GA4, Ignite Digital
- Navigating Changes to Google Consent Mode, Cardinal Path
- The Home Service Owner’s Guide to Google Analytics 4, Kaera Marketing
- Server-Side Conversion Tracking: How It Works, Loop Optimizations
